TIG tjheseletsa Robot

Tlhaloso e Khutšoanyane:

Tig welding roboto e khethehile e etselitsoe ho thibela maqhubu a phahameng e leng koluoa ​​​​ho karolo ea taolo ea motlakase.Re na le roboto ea Tig welding e nang le wire feeder le Tig welding robot self-fusion.
E na le likarolo tse kang tse ka tlase:
- Mehato e khethehileng ea tšireletso bakeng sa maqhubu a phahameng
- Roboto ea welding ea Tig e nang le wire feeder le Tig welding robot self-fusion
- E loketse poleiti ea Thin e nang le phoso e ntle ea ho lokisa;
- Tšepe e sa hloekang, tšepe ea carbon, Aluminium


Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

TIG welding Robot

Kenyelletso ea Sehlahisoa

GTAW e sebelisoa hangata ho tjheseletsa likarolo tse tšesaane tsa tšepe e sa hloekang le lirafshoa tse se nang ferrous joalo ka aluminium, magnesium le lialloys tsa koporo.Ts'ebetso e fa opareitara taolo e kholoanyane holim'a weld ho feta lits'ebetso tse hlolisanoang joalo ka tšepe e sirelelitsoeng ea arc le welding ea tšepe ea khase, e lumellang litšepe tse matla, tsa boleng bo holimo.Leha ho le joalo, GTAW ha e bapisoa le eona e rarahane ho feta ebile e thata ho e tseba, 'me ho feta moo, e lieha haholo ho feta mekhoa e meng e mengata ea ho cheselletsa.Ts'ebetso e amanang le eona, plasma arc welding, e sebelisa toche ea welding e fapaneng hanyane ho theha arc e tsepamisitsoeng haholo, ka lebaka leo hangata e etsoa ka boiketsetso.

Yunhua sebelisa mehato e khethehileng ea thibelo nakong ea TIG tjheseletsa, 'me ho tla ba le buka e khethehileng bakeng sa opareitara, feela haeba opareitara e ka latela bukana,' me ikwetlisetse makhetlo a 'maloa, e ka ipabola ka potlako haholo.

Tig-welding-torch

PRODUCT PARAMETER & DINTLHA

 

Mohlala

WSM-315R

WSM-400R

WSM-500R

E lekantsoe matla a ho kenya / maqhubu

Phase e meraro380V (+/-) 10% 50Hz

E reitiloe matla a ho kenya (KVA)

11.2

17.1

23.7

Lintlha tse kentsoeng hajoale(A)

17

26

36

E lekanyelitsoe ho tšoarella ha mojaro (%)

60

60

60

DC le hona joale kamehla Molumo oa ho cheselletsa (A)

5~315

5-400

5-500

DC pulse Peak current (A)

5~315

5-400

5-500

Base current (A)

5~315

5-400

5-500

Pulse duty (%)

1-100

1-100

1-100

Pulse frequency (Hz)

0.2-20

TIG Arc e qala hona joale (A)

10-160

10-160

10-160

Arc stopping hona joale (A)

5~315

5-400

5-500

Nako ea ho eketseha ha hona joale (S)

0.1-10

Nako ea ho fokotseha ha joale (S)

0.1-15

Nako ea pele ho nako (S)

0.1-15

Nako ea ho emisa ha khase (S)

0.1-20

Mokhoa oa ho sebetsa oa arc stoping current

Mehato e 'meli, Mehato e mene

TIG setaele sa arc sa sefofane

HF arc

Hand arc welding Welding hajoale

30~315

40-400

50 ~ 500

Mokhoa oa ho pholisa

Pholiso ea metsi

Sehlopha sa tšireletso ea likhetla

1P2S

Boemo ba ho itšireletsa

H/B

 

Kopo

Tig-welding-robot-for-electric-iron

SETŠOANTŠO 1

Selelekela

Roboto ea ho tjheseletsa Tig bakeng sa Tshipi ya Motlakase

Ts'ebetso ea ho cheselletsa Pulse Tig bakeng sa seam sekala sa litlhapi.

SETŠOANTŠO 2

Selelekela

Roboto ea tjheseletsa ea Tig bakeng sa Stainless steel

Tig arc welding bakeng sa tjheseletsa ea lipeipi tse lisekoere.

Tig-welding-robot-for-stainless-steel
Tig-stainless-steel-welding

SETŠOANTŠO 3

Selelekela

Mekhahlelo ea TIG welding welding

Ts'ebetso ea welding ea Pulse Tig.Botenya: 1.5mm, phoso e loketseng: ± 0.2mm.

PHELISO LE THUSO

Yunhua e ka fana ka bareki ka maemo a fapaneng a ho tsamaisoa.Bareki ba ka khetha ho tsamaisoa ka sekepe ka leoatle kapa ka sefofane ho latela maemo a pele a potlakileng.Likotlolo tsa ho paka liroboto tsa YOO HEART li ka kopana le tlhokahalo ea thepa ea leoatle le moea.Re tla lokisa lifaele tsohle joalo ka PL, setifikeiti sa tšimoloho, invoice le lifaele tse ling.Ho na le mosebeletsi eo mosebetsi oa hae o ka sehloohong e leng ho etsa bonnete ba hore roboto e 'ngoe le e' ngoe e ka isoa boema-kepe ba bareki ntle le ho ts'oaroa matsatsing a 40 a ts'ebetso.

Packing

packing and delivery site

truck delivery from factory to final customer

Ka mor'a tšebeletso ea thekiso
Moreki e mong le e mong o lokela ho tseba roboto ea YOO HEART pele a e reka.Hang ha bareki ba e-na le roboto e le 'ngoe ea YOO HEART, mosebeletsi oa bona o tla ba le koetliso ea mahala ea matsatsi a 3-5 fekthering ea YOO HEART.Ho tla ba le sehlopha sa Wechat kapa sehlopha sa WhatsApp, litsebi tsa rona tse ikarabellang ka mor'a tšebeletso ea thekiso, motlakase, hard ware, software, joalo-joalo, li tla ba teng. Haeba bothata bo le bong bo etsahala habeli, setsebi sa rona se tla ea k'hamphaning ea bareki ho rarolla bothata. .

FQA
Q1.Ke lits'ebetso life tse ntle ka ho fetisisa bakeng sa sistimi ea welding ea robotic TIG?
Lisebelisoa tsa A. High-volume, tse fokolang tse fapaneng li loketse hantle ho cheselletsa liroboto;leha ho le joalo, mefuta e tlase, mefuta e mengata e fapaneng e kanna ea sebetsa haeba e sebelisoa ka lisebelisoa tse nepahetseng.Likhamphani li tla hloka ho nahana ka litšenyehelo tse ling bakeng sa lisebelisoa ho fumana hore na sistimi ea welding ea liroboto e ntse e ka fana ka phaello e tiileng matseteng a pele.Ha e le TIG welding, kopo e ntle ka ho fetisisa ke likotoana tse tšesaane le tšepe.

Q2.Ke efe e sebelisang betere?HF TIG tjheseletsa kapa Phahamisa TIG tjheseletsa?
A. Khetho e tummeng ka ho fetisisa le e ntle ka ho fetisisa ke tšebeliso ea High Frequency start e hlahisang maqhubu a phahameng a arc a khonang ho ionizing moea le ho koala lekhalo pakeng tsa ntlha ea tungsten le karolo ea mosebetsi.Ho qala ha Maqhubu a Phahameng ke mokhoa o sa thekeseleng 'me o baka tšilafalo ntle le haeba tungsten e se e otsitsoe haholo kapa amperage e phahame haholo qalong.Ke khetho e ntle haholo bakeng sa aluminium ea ho cheselletsa, 'me ke eona feela khetho e amohelehang.Ntle le haeba o hloka ho cheselletsa Aluminium, ha ho hlokahale hore u be le "High Frequency" e qalang, empa ho monate ho tlameha ho cheselletsa AC kapa DC haeba u na le khetho.

Q3.Na roboto ea ho tjheseletsa ea YOO HEART TIG e ka sebelisa setlolo?
A. E, re ba bang ba ba seng bakae ba ka sebelisang li-filler ha TIG e cheseletsa.Barekisi ba bangata ba 'marakeng ba ka' na ba u bolella hore liroboto tsa bona li ka sebelisoa bakeng sa TIG welding, u ka mo botsa lipotso tse kang: mokhoa oa ho sefa HF?

Q4.Mokhoa oa ho beha mohloli oa matla ha o sebelisa TIG welding?
A.Mochini oa hau oa ho tjheseletsa o lokela ho behoa ho DCEN (Direct current electrode negative) e tsejoang hape e le polarity e otlolohileng bakeng sa karolo leha e le efe ea mosebetsi e hlokang ho ts'oaroa ntle le haeba thepa e ka ba aluminium kapa magnesium.Maqhubu a phahameng a behiloe ho qala a fumanehang a hahiloe matsatsing ana ka li-inverters.Phallo ea poso e lokela ho beoa bonyane metsotsoana e 10 bonyane.Haeba A/C e le teng, e behiloe maemong a kamehla a lumellanang le DCEN.Seta sehokelo le li-switches tsa amperage ho li-setting tse hole.Haeba thepa e hlokang ho chesetsoa ke aluminium polarity e lokela ho hlophisoa ho A/C, A/C balance e lokela ho behoa ho hoo e ka bang 7 le phepelo ea maqhubu a phahameng e lokela ho tsoela pele.

Q5.Mokhoa oa ho beha thebe ea Khase nakong ea welding ea TIG?
A. TIG welding e sebelisa khase ea inert bakeng sa ho sireletsa sebaka sa welding hore se se ke sa silafala.Kahoo khase ena ea inert e boetse e boleloa e le khase e sireletsang.Maemong 'ohle e lokela ho ba argon' me ha ho na khase e 'ngoe ea inert e kang neon kapa xenon joalo-joalo haholo-holo haeba ho lokela ho etsoa welding ea TIG.E lokela ho behoa hoo e ka bang 15 cfh.Bakeng sa aluminium ea ho cheselletsa feela, o ka sebelisa motsoako oa 50/50 oa ​​argon le helium.


  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa wa hao mona mme o re romele wona